Honda ACCORD HYBRID 2005 Service Manual page 415

11. Replace the A/F sensor (Sensor 1) (see page
11-213).
12. Reconnect all connectors.
13. Turn the ignition switch ON (II).
14. Reset the PCM w i t h the HDS.
15. Do the PCM idle learn procedure (see page 11-340).
16. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P2627 and/or P2630* is indicated,
check for poor connections or loose terminals at
the A/F sensor (Sensor 1) and the PCM, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated D T C s
troubleshooting.
17. Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 11-6).
18. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P2627 and/or P2630* is indicated,
check for poor connections or loose terminals at
the A/F sensor (Sensor 1) and the PCM, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated DTCs
troubleshooting.
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-219). •
NO—Troubleshooting is c o m p l e t e . *
11-175