PGM-FI System
B r a k e B o o s t e r P r e s s u r e S e n s o r
R e p l a c e m e n t
M A F S e n s o r / I A T S e n s o r 1
R e p l a c e m e n t
1. Disconnect the brake booster pressure sensor 3P
connector (A).
2. Remove the brake booster pressure sensor (B).
3. Install the sensor in the reverse order of removal.
1. Disconnect the MAF sensor/IAT sensor 1 connector
(A).
B
1.5 N m
(0.15 k g f m ,
1.1 Ibfft)
2. Remove the screws (B).
3. Remove the MAF sensor/IAT sensor 1 (C).
4. Install the sensor in the reverse order of removal.
11-220