Honda ACCORD HYBRID 2005 Service Manual page 455

E C T S e n s o r 1 R e p l a c e m e n t
1. Remove the intake manifold cover (see step 1 on
page 9-3).
2. Remove the air cleaner (see page 11-382).
3. Disconnect the ECT sensor 1 connector (A).
4. Remove ECT sensor 1 (B).
5. Install the sensor in the reverse order of removal
w i t h a new O-ring (C). Then refill the radiator w i t h
engine coolant (see page 10-6).
I A T S e n s o r 2 R e p l a c e m e n t
1. Remove the intake m a n i f o l d cover (see step 1 on
page 9-3).
2. Disconnect the IAT sensor 2 connector (A).
18 N-m
(1.8 k g f m , 13 Ibfft)
3. Remove IAT sensor 2 (B).
4. Install the sensor in the reverse order of removal
w i t h a new O-ring (C).
11-215