A P P S e n s o r R e p l a c e m e n t
1. Remove the throttle cable (see page 11-385).
2. Disconnect the accelerator pedal position (APP)
sensor 6P connector (A).
3. Remove the bolts (B) and the APP sensor (C).
4. Install the sensor in the reverse order of removal.
T h r o t t l e A c t u a t o r C o n t r o l M o d u l e
R e p l a c e m e n t
1. Remove the right kick panel (see page 20-45).
2. Disconnect the throttle actuator control module 16P
connector (A).
3. Remove the bolts (B) and the throttle actuator
control module (C).
4. Install the control module in the reverse order of
removal.
11-265