DTC P15AD: Engine Mount Control Unit
Internal Circuit Malfunction
1. Turn the ignition switch ON (II).
2. Clear the DTC w i t h the HDS.
3. Check for Temporary DTCs or DTCs w i t h the HDS.
Is DTC P15AD
indicated?
Y E S - G o t o step 4.
NO—Intermittent failure, system is OK at this t i m e .
Check for poor connections or loose terminals at
the engine mount control unit and the active
control engine mount (ACM) a c t u a t o r . •
4. Turn the ignition switch OFF.
5. Replace the engine m o u n t control unit (see page
11-323).
6. Turn the ignition switch ON (II).
7. Reset the PCM w i t h the HDS.
8. Do the PCM idle learn procedure (see page 11-340).
9. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary
DTCs
or DTCs
indicated?
Y E S - l f DTC P15AD is indicated, check for poor
connections or loose terminals at the engine mount
control unit and the active control engine mount
(ACM) actuator, then go to step 7. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated D T C s troubleshooting.
NO—Troubleshooting is complete. •
11-297