Distance Ospf - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a value of 50 for the default metric.
console(config-router)#default-metric 50

distance ospf

The distance ospf command sets the preference values of OSPF route types in the router. Lower
route preference values are preferred when determining the best route. The type of OSPF route
can be intra, inter, external. All the external type routes are given the same preference value. Use
the "no" form of this command to reset the preference values to the default.
Syntax
distance ospf {external | inter-area | intra-area }
no distance ospf {external | inter-area | intra-area }
distance — Used to select the best path when there are two or more routes to the same
•
destination from two different routing protocols (Range: 1–255).
Default Configuration
The default preference value is 110.
Command Mode
Router OSPF Configuration mode.
Router OSPFv3 Configuration mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following examples set route preference values of OSPF in the router.
console(config-router)#distance ospf intra 4
console(config-router)#distance ospf type1 19
distance
distance
757