Show Ip Mroute - Dell N1100-ON Reference Manual

show ip mroute

Use the show ip mroute command to display a summary or details of the
multicast table.
Syntax
show ip mroute
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip mroute
Source IP Group IP
--------------- --------------- -------- ----------- --------------- -----
192.168.0.11 239.0.5.7
show ip mroute group
Use the show ip mroute group command to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing
interfaces, RPF neighboring routers, and expiration times of all the entries in
the multicast mroute table containing the groupipaddr value.
Syntax
show ip mroute group groupipaddr [summary]
• groupipaddr — IP address of the multicast group.
Multicast route table
Expiry
(mm:ss)
3:03
Up Time
(hh:mm:ss) RPF Neighbor
15:54:12 192.168.0.10
Layer 3 Routing Commands
Flags
1587