Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 2349

SNMP Commands
snmp station {ip_address | ipv6_address} {[udp_port
disable]}
no snmp station {ip_address | ipv6_address}
show snmp station
snmp community-map community_string {[user useraccount_name] | {enable | disable}}
no snmp community-map community_string
snmp community-map mode {enable | disable}
show snmp community-map
snmp security {no-security | authentication set | authentication all | privacy set | privacy all |
trap-only}
show snmp security
show snmp statistics
show snmp mib-family [table_name]
snmp-trap absorption {enable | disable}
snmp-trap to-webview {enable | disable}
|
snmp-trap replay-ip {ip_address
snmp-trap filter-ip {ip_address | ipv6_address} trap_id_list
no snmp-trap filter-ip {ip_address | ipv6_address
snmp authentication-trap {enable | disable}
show snmp-trap replay-ip
show snmp-trap filter-ip
show snmp authentication-trap
show snmp-trap config
DNS Commands
ip domain-lookup
no ip domain-lookup
ip name-server server-address1 [server-address2 [server-address3]]
ipv6 name-server server-ipv6_address1 [server-ipv6_address2 [server-ipv6_address3]]
ip domain-name name
no ip domain-name
show dns
OmniSwitch CLI Reference Guide
] [ ]
username [v1 | v2 | v3] [enable |
}
ipv6_address [seq_id]
}
trap_id_list
March 2011 page 21 SNMP Commands