Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 2347

show log swlog
show log swlog [session session_id] [timestamp start_time [end_time]] [appid appid] [level
level]
show swlog
Health Monitoring Commands
health threshold {rx percent | txrx percent | memory percent | cpu percent }
health interval seconds
show health configuration
show health [port slot/port | slot slot
show health all {memory | cpu | rx | txrx}
CMM Commands
reload secondary [in [hours:] minutes | at hour:minute [month day | day month]]
reload secondary cancel
reload all [in [hours:] minutes | at hour:minute [month day | day month]]
reload all cancel
reload from image-dir {rollback-timeout minutes | no rollback-timeout} [in
| at hour:minute] [redundancy-time minutes]
reload slot slot
copy certified image-dir [make-running-directory]
issu from image-dir
issu slot num
write memory [flash-synchro]
copy running certified [flash-synchro]
modify running-directory image-dir
copy flash-synchro
takeover
show running-directory
show reload [status | all status]
show microcode [certified | loaded | issu | image-dir]
usb {enable | disable}
usb auto-copy {enable | disable}
mount [/uflash]
umount /uflash
show usb statistics
show issu status
Chassis Management and Monitoring Commands
system contact text_string
system name text_string
OmniSwitch CLI Reference Guide
[ ]]
-slot1 [statistics]
March 2011
system location text_string
system date [mm/dd/yyyy]
system time [hh:mm:ss]
system timezone [timezone_abbrev]
system daylight-savings-time
reload slot slot
power slot slot
no power slot slot
temp-threshold temp
powersupply enable [slot]
show system
show hardware info
show chassis
show cmm [slot]
show slot [slot]
show module [slot]
show module long [slot]
show module status [slot]
show powersupply [slot]
[ ]
hours: minutes show fan [slot]
show fantray [slot]
show temperature [fabric [index] | slot [index] | fantray [index] | cmm [index | cmm_letter]]
Chassis MAC Server (CMS) Commands
mac-range eeprom start_mac_address count
show mac-range [index]
show mac-range [index] alloc
Network Time Protocol Commands
no ntp server {ip_address}
ntp server synchronized
ntp server unsynchronized
ntp client admin-state {enable | disable}
ntp src-ip preferred {default | no-loopback0 | ip_address}
no ntp src-ip preferred
ntp broadcast-client {enable | disable}
ntp broadcast-delay microseconds
ntp key key [trusted | untrusted]
ntp key load
ntp authenticate {enable | disable}
ntp master {stratum-number}
ntp interface {interface-ip} {enable | disable}
page 19 Health Monitoring Commands