Vlan Stacking Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

CLI Change Guidelines

VLAN Stacking Commands

AOS Release 6
ethernet-service {svlan | ipmvlan | management-
vlan} svid1[-svid2] [enable | disable] [[1x1 | flat] stp
{enable | disable}] [name description]
no ethernet-service {svlan | ipmvlan | management-
vlan} svid1[-svid2]
ethernet-service service-name service-name {svlan |
ipmvlan} svid
no ethernet-service service-name service-name
{svlan | ipmvlan} svid
ethernet-service svlan svid1[-svid2] nni {slot/port1[-
port2] | linkagg agg_num} [stp | erp]
no ethernet-service svlan svid1[-svid2] nni {slot/
port1[-port2] | linkagg agg_num}
ethernet-service nni {slot/port1[-port2] | agg_num}
[tpid value] [{stp | gvrp} legacy-bpdu {enable | dis-
able}] [transparent-bridging {enable | disable}]
n/a
ethernet-service sap sapid uni {slot/port1[-port2] |
linkagg agg_num}
ethernet-service sap sapid no uni {slot/port1[-port2] |
linkagg agg_num}
ethernet-service sap sapid no cvlan {all | cvid | cvid1-
cvid2 | untagged}
ethernet-service {svlan | ipmvlan} svid1[-svid2]
source-learning {enable| disable}
ethernet-service uni-profile uni-profile-name [l2-
protocol {stp | 802.1x | 802.1ab | 802.3ad | gvrp |
amap} {peer | discard | tunnel}
ethernet-service uni {slot/port1[-port2] | agg_num}
uni-profile uni-profile-name
show ethernet-service mode
show ethernet-services vlan [svid1-[svid2]]
show ethernet-services port {slot/port | linkagg
agg_num}
show ethernet-services nni [slot/port | linkagg
agg_num]
OmniSwitch CLI Reference Guide March 2011
AOS Release 6 to AOS Release 7
AOS Release 7
ethernet-service svlan <svlan1[-svlan2]> [admin-
state {enable | disable}] [stp {enable | disable}]
[name <description>]
no ethernet-service svlan <svlan1[-svlan2]>
ethernet-service service-name <service-name>
svlan <svlan>
no ethernet-service service-name <service-name>
svlan <svlan>
ethernet-service svlan <svlan1[-svlan2]> nni {port
<slot/port1[-port2]> | linkagg <linkagg1[-
linkagg2]>}
no ethernet-service svlan <svlan1[-svlan2]> nni
{port <slot/port1[-port2]> | linkagg <linkagg1[-
linkagg2]>}
ethernet-service nni {port <slot/port1[-port2]> |
linkagg <linkagg1[-linkagg2]>} [tpid <value>]
[{stp | mvrp} legacy-bpdu {enable | disable}]
no ethernet-service nni {port <slot/port1[-port2]> |
linkagg <linkagg1[-linkagg2]>}
ethernet-service sap <sapid> uni {port <slot/
port1[-port2]> | linkagg <linkagg1[-linkagg2]>}
no ethernet-service sap <sapid> uni {port <slot/
port1[-port2]> | linkagg <linkagg1-[linkagg2]>}
no ethernet-service sap <sapid> cvlan {all |
<cvlan1[-cvlan2]> | untagged}
ethernet-service svlan <svlan1[-svlan2]> source-
learning {enable| disable}
ethernet-service uni-profile uni-profile-name [l2-
protocol {stp | 802.1x | 802.1ab | 802.3ad | amap |
mvrp} {peer | discard | tunnel}
ethernet-service uni {port <slot/port1[-port2]> |
linkagg <linkagg1[-linkagg2]>} uni-profile <uni-
profile-name>
removed
show ethernet-services vlan [svid1-[svid2]]
show ethernet-services {port <slot/port> | linkagg
<linkagg>}
show ethernet-services nni [port <slot/port> | link-
agg <linkagg>]
page B-27