Vlan Manager Commands - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Omniswitch series
Table of Contents

Advertisement

AOS Release 6 to AOS Release 7

VLAN Manager Commands

AOS Release 6
vlan <vid1[-vid2]> 802.1q {<slot/port1[-port2]> |
<aggregate_id>}
no vlan <vid1[-vid2]> 802.1q {<slot/port[-port2]> |
<aggregate_id>}
vlan <vid> port default {<slot/port> | <link_agg>}
no vlan <vid1[-vid2]> port default {<slot/port> |
<link_agg>}
vlan <vid1[-vid2]> [enable | disable]
no vlan vid mac mac_address
no vlan vid mac range low_mac_address
no vlan vid ip ip_address [subnet_mask]
no vlan vid ipx ipx_net
no vlan vid protocol {ip-e2 | ip-snap | ipx-e2 | ipx-
nov | ipx-llc | ipx-snap | decnet | appletalk | ethertype
type | dsapssap dsap/ssap | snap snaptype}
no vlan vid port slot/port
no vlan port mobile slot/port
no vlan vid router ipx
show vlan [<vid1[-vid2]>] [port [<slot/port> |
<link_agg>]]
show vlan router mac-status
vlan 802.1q slot/port frame type {all | tagged}
show 802.1q {slot/port | aggregate_id}
show vlan gvrp [vid1[-vid2]]
show vlan ipmvlan [ipmvlan-id1[-ipmvlan-id2]]
vlan vid1[-vid2] {1x1 | flat} stp {enable | disable}
vlan <vid1[-vid2]> stp {enable | disable}
vlan vid1[-vid2] mobile-tag {enable | disable}
vlan vid router ipx ipx_net [rip | active | inactive |
triggered] [e2 | llc | snap | novell] [timeticks ticks]
page B-26
AOS Release 7
vlan <vid1[-vid2]> members {port <slot/port1[-
port2]> | linkagg <agg1[-agg2]>} tagged
no vlan <vid1[-vid2]> members {port <slot/port1[-
port2]> | linkagg <agg1[-agg2]>}
vlan <vid> members {port <slot/port1[-port2]> |
linkagg <agg1[-agg2]>} untagged
no vlan <vid1[-vid2]> members {port <slot/port1[-
port2]> | linkagg <agg1[-agg2]>}
vlan <vid1[-vid2]> [admin-state {enable | disable}]
removed
removed
removed
removed
removed
removed
removed
removed
show vlan [<vid1[-vid2]>] [members [port <slot/
port1[-port2]> | linkagg <agg1[-agg2]>]]
removed
removed
removed
removed
removed
removed
spantree vlan <vid1[-vid2]> admin-state {enable |
disable}
removed
removed
OmniSwitch CLI Reference Guide
CLI Change Guidelines
March 2011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 10k

Table of Contents