Show Inline-Power Slot - Extreme Networks ExtremeWare XOS Command Reference Manual

Power Over Ethernet Commands

show inline-power slot

show inline-power slot <slot>
Description
Displays inline power information for the specified slot.
Syntax Description
slot
Default
N/A.
Usage Guidelines
The output indicates the following inline power status information for each slot:
Inline power status—The status of inline power. The status conditions are:
●
Enabled
■
Disabled
■
Firmware status—The operational status of the slot. The status conditions are:
●
Operational
■
Not operational
■
Disabled
■
Subsystem failure
■
Card not present
■
Slot disabled
■
Budgeted power—The amount of power, in watts, that is available to the slot.
●
Measured power—The amount of power, in watts, that currently being used by the slot.
●
Legacy—The status of the legacy mode, which allows detection of many non-standard PDs.
●
Example
The following command displays inline power information for slot 3:
show inline-power slot 3
Following is sample output from this command:
Slot Inline-Power
3 Enabled
444
Specifies the slot.
Budgeted
Firmware Status Power (Watts)
Operational 500 W
Measured
Power (Watts) Legacy
441 W Disabled
ExtremeWare XOS 11.3 Command Reference