Unconfigure Sflow - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

unconfigure sflow

unconfigure sflow
Description
Resets all the sFlow values to the default values.
Syntax Description
This command has no arguments or variables
Default
The default values for sFlow are as follows:
sFlow agent IP address—0.0.0.0
●
sampling frequency—sample one every 8196 packets
●
polling interval—20 seconds
●
maximum CPU sample limit—2000 samples per second
●
sFlow is unconfigured and disabled on all ports.
Usage Guidelines
This command resets sFlow values to default value, and removes any port configurations, and any
sFlow collectors configured on the switch.
Example
The following command unconfigures sFlow:
unconfigure sflow
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
576
ExtremeWare XOS 11.3 Command Reference