Extreme Networks ExtremeWare XOS Command Reference Manual page 226

Commands for Managing the Switch
Row Status
Engine-ID
User Name
Security Name
Authentication
Privacy
Storage Type
Row Status
Engine-ID
User Name
Security Name
Authentication
Privacy
Storage Type
Row Status
Engine-ID
User Name
Security Name
Authentication
Privacy
Storage Type
Row Status
Engine-ID
User Name
Security Name
Authentication
Privacy
Storage Type
Row Status
Total num. of entries in usmUserTable : 6
The following command lists details for the specified user, testuser:
show snmpv3 user testuser
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_user_name
Platform Availability
This command is available on all platforms.
226
: Active
: 80:00:07:7c:03:00:04:96:1f:a2:60 'H'
: initialmd5
: initialmd5
: HMAC-MD5
: No-Privacy
: Permanent
: Active
: 80:00:07:7c:03:00:04:96:1f:a2:60 'H'
: initialsha
: initialsha
: HMAC-SHA
: No-Privacy
: Permanent
: Active
: 80:00:07:7c:03:00:04:96:1f:a2:60 'H'
: initialmd5Priv
: initialmd5Priv
: HMAC-MD5
: DES
: Permanent
: Active
: 80:00:07:7c:03:00:04:96:1f:a2:60 'H'
: initialshaPriv
: initialshaPriv
: HMAC-SHA
: DES
: Permanent
: Active
parameter was added in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.3 Command Reference