Extreme Networks ExtremeWare XOS Command Reference Manual page 194

Commands for Managing the Switch
If you choose to always enable a power supply, regardless of the affect on the total available power, you
see
Configured ON
PowerSupply 1 information:
State:
PartInfo:
Summit X450 switch example:
The following command displays the status of the power supplies installed in a Summit X450 switch:
show power
The following sample output assumes that you have not installed an EPS:
PowerSupply 1 information:
State:
PartInfo:
PowerSupply 2 information:
State:
The following sample output assumes that you have installed an EPS:
PowerSupply 1 information:
State:
PartInfo:
PowerSupply 2 information:
State:
PartInfo:
History
This command was first available in an ExtremeWare XOS 10.1.
The syntax for this command was modified in ExtremeWare XOS 11.0 from
show power {<ps_num>} {detail}
The output was modified to include power management details for modular switches in ExtremeWare
XOS 11.3.
Platform Availability
This command is available on all available platforms.
194
next to the state of the power supply, as shown in the sample truncated output:
Powered On (Configured ON)
PS 2336 0413J-00732 4300-00137
Powered On
Internal Power Supply
Empty
Powered On
Internal Power Supply
Powered On
External Power Supply
.
show powersupplies
ExtremeWare XOS 11.3 Command Reference
to