Reboot - Extreme Networks ExtremeWare XOS Command Reference Manual

reboot

reboot {time <month> <day> <year> <hour> <min> <sec>} {cancel} {warm} {msm
<slot_id>}
Description
Reboots the switch or the module in the specified slot at a specified date and time.
Syntax Description
time
cancel
warm
msm
slot_id
Default
N/A.
Usage Guidelines
If you do not specify a reboot time, the switch will reboot immediately following the command, and
any previously scheduled reboots are cancelled. Prior to rebooting, the switch returns the following
message:
Do you want to save configuration changes to primary and reboot?
(y - save and reboot, n - reboot without save, <cr> - cancel command)
To cancel a previously scheduled reboot, use the
Modular switches only. The modules that can be rebooted are switch fabric MSM modules.
BlackDiamond 8800 family of switches only. On the BlackDiamond 8800 family of switches, if your
default BootROM image becomes corrupted, you can force the MSM to boot from an alternate BootROM
image by inserting a sharp object into the "A" and "R" holes on the MSM and applying slight pressure.
Refer to Extreme Networks Consolidated XOS Hardware Installation Guide for information on the MSM.
The option on the BlackDiamond 8800 family of switches affects the entire module.
reboot MSM
Example
The following command reboots the switch at 8:00 AM on April 15, 2005:
reboot time 04 15 2005 08 00 00
ExtremeWare XOS 11.3 Command Reference
Specifies a reboot date in mm dd yyyy format and reboot time in hh mm ss
format.
Cancels a previously scheduled reboot.
Restarts software only.
Specifies rebooting the MSM module.
NOTE: This variable is available only on modular switches.
Specifies the slot--A or B--for an MSM module.
NOTE: This variable is available only on modular switches.
cancel
option.
reboot
87