Extreme Networks ExtremeWare XOS Command Reference Manual page 723

Following is sample output from this command:
Port Statistics
Port IQP1
Xmts
================================================================================
1:1
1:2
================================================================================
History
This command was first available in ExtremeWare XOS 10.1.
The ingress information was added in ExtremeWare XOS 11.0
Also, you must specify the ports in ExtremeWare XOS 11.0.
The egress and no-refresh keywords were added in ExtremeWare 11.3.
Platform Availability
This command is available only on the BlackDiamond 10K switch.
ExtremeWare XOS 11.3 Command Reference
IQP2 IQP3
Xmts Xmts
0 0 0
0 0 0
IQP4 IQP5 IQP6
Xmts Xmts Xmts
0 0 0
0 0 0
show ports qosmonitor
IQP7 IQP8
Xmts Xmts
0 0
0 0
723