Unconfigure Inline-Power Priority Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure inline-power priority ports

unconfigure inline-power priority ports [all | <port_list>]
Description
Unconfigures the PoE priority on the specified ports, and returns the ports to the default PoE port
priority value of low.
Syntax Description
all
port_list
Default
Low.
Usage Guidelines
Use this to reset the PoE port priority on specified ports to the default value of low.
If there are multiple ports at the same priority level (either configured, or by default) and one of the
ports must have power withdrawn because of excessive power demands, those ports with the lower
port number are powered first. The higher port numbers have power withdrawn first in the case of
equal PoE port priorities.
Example
The following command resets the PoE priority on ports 4 – 6 on slot 3 to low:
unconfigure inline-power priority ports 3:4-3:6
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
ExtremeWare XOS 11.3 Command Reference
Specifies all ports.
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
unconfigure inline-power priority ports
453