Part number—A collection of numbers and letters that make up the part number of the power
■
supply.
Summit X450 switch only:
Internal Power Supply (PowerSupply 1 information)—The Summit X450 switch comes with one
■
power supply pre-installed at the factory. The Summit X450 power supply is not user-replaceable;
therefore, the part information display indicates internal power supply.
External Power Supply (PowerSupply 2 information)—Displays information about the optional
■
External Power System (EPS) that allows you to add a redundant power supply to the Summit
X450 switch to protect against a power supply failure.
On modular switches, the output also includes the following information:
Revision—Displays the revision number of the power supply.
●
Odometer—Specifies the date and how long the power supply has been operating.
●
Temperature—Specifies, in celsius, the current temperature of the power supply.
●
Input—Specifies the input voltage and the current requirements of the power supply and whether
●
the input is AC or DC.
Output 1 and Output 2—Specifies the output voltage and the current supplied by the power supply.
●
The values are only displayed if known for the platform.
In ExtremeWare XOS 10.1 and earlier, use the
detailed health information about the power supplies.
Example
Modular switch example:
The following command displays the status of the power supply installed in slot 1 in a modular switch:
show power 1
The following is sample output from this command:
PowerSupply 1 information:
State:
Powered On
PartInfo:
PS 2336 5003J-00479 4300-00137
Revision:
2.0
Odometer:
90 days 5 hours
Temperature:
29.0 deg C
Fan 1:
6473 RPM
Fan 2:
6233 RPM
Input:
230.00 V AC
Output 1:
48.50 V,
Output 2:
12.44 V,
If power management needs to disable a power supply to maximize the total available power, you see
Disabled for net power gain
truncated output:
PowerSupply 1 information:
State:
Powered Off (Disabled for net power gain)
PartInfo:
PS 2336 0413J-00732 4300-00137
...
ExtremeWare XOS 11.3 Command Reference
show powersupplies {detail}
7.25 A
(48V/1104W Max)
0.62 A
(12V/48W Max)
next to the state of the power supply, as shown in the sample
show power
command to view
193