Virtual-Router - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Virtual Routers

virtual-router

virtual-router {<vr-name>}
Description
Changes the virtual router domain context.
Syntax Description
vr-name Specifies the name of the virtual router.
Default
N/A.
Usage Guidelines
Use this command to change the virtual router context for subsequent commands. When you issue the
command, the prompt changes to reflect the virtual router domain. Configuration commands for layer 3
routing protocols, creating VLANs, and deleting VLANs apply only to the current virtual router
domain.
Under a virtual router configuration domain, any virtual router commands are applied only to that
virtual router. The virtual router commands consist of all the BGP, OSPF, PIM and RIP commands, and
the commands listed in Table 18.
Table 18: Virtual router commands
[enable | disable] ipforwarding
clear iparp *
clear counters iparp *
configure iparp *
configure iparp [add | delete] *
[enable | disable] iparp *
show iparp *
configure iproute [add | delete] *
show iproute *
show ipstats *
rtlookup
create [vlan | vman] <vlan-name>
[enable | disable] igmp
[enable | disable] igmp snooping
[enable | disable] ipmcforwarding
show igmp
634
ExtremeWare XOS 11.3 Command Reference