Slot Properties - Extreme Networks EPICenter Reference Manual

The Inventory Manager
Num. Interfaces
Location
BootROM Version
S/W Version
Description
Product Name
Serial Number
Country Code
Antenna Type
Antenna Location
Under the Physical Wireless Interfaces tab, the following information is shown for each interface:
Interface
802.11 Mode
RF Channel
RF Profile
Under the Wireless Ports tab, the following information is shown for each port:
Interface
State
ESS
Security Profile
802.11 Auth
Network Auth
Encryption
MAC Address

Slot Properties

To view slot properties, do the following:
1 From the Component Tree, click on the plus sign of a modular device to display the slots for that
particular device.
NOTE
The Component Tree does not display the empty slots in a device.
92
The number of physical interfaces associated with this port
Physical location of the wireless port as configured by the administrator
The BootROM version running on the device connected to this port
The version of the software running on the device connected to this port
A description of the device connected to this port
The product name of the device connected to this port
The serial number of the device connected to this port
The Country Code associated with the device connected to this port, which determines
country-dependent frequency and other regulatory settings on the wireless port, shared by all
wireless ports on the switch
The type of antenna on the device connected to this port, e.g. Integrated or detachable
The physical location of the antenna (Indoor, Outdoor)
Wireless interface identifier. A remote connect interface is indicated by a "v" preceding the
interface identifier, for example v.1.1.1, v.1.1.2, and so on.
Wireless LAN RF mode: 802.11a, 802.11b, or 802.11g/b
Radio frequency channel used by the interface
Radio frequency profile configured for or assigned to this interface. See the section on
configuring RF properties in the Summit 300-48 Switch Software User Guide.
Wireless interface identifier. A remote connect interface is indicated by a "v" preceding the
interface identifier, for example v.1.1.1, v.1.1.2, and so on.
Interface state (Active or Inactive)
The ESS name (the name of the wireless network associated with the security profile)
Security profile configured for this interface; see the section on CLI commands for security on
the switch in the Summit 300-48 Switch Software User Guide
802.11 authentication method for this wireless interface: all, open, or shared
Network authentication method: all methods, none, Net Login, Mac RADIUS, 802.11x, WPA
or WPA/PSK
Encryption method: all encryption methods, N/A (none), WEP64, TKIP, AES, WEP128, or
Other
MAC address for the wireless port
EPICenter Reference Guide