Power Over Ethernet Commands
disable inline-power ports
disable inline-power ports [all | <port_list>]
Description
Shuts down PoE power currently provided to all ports or to specified ports.
Syntax Description
all
port_list
Default
Enable.
Usage Guidelines
Disabling inline power to ports immediately removes power to any connected PDs. By default, the
capability to provide inline power to all ports is enabled.
Disabling inline power using the
traversing the port. And, disabling the port using the
power supplied to the port.
Disabling inline power to a port providing power to a PD immediately removes power to the PD.
NOTE
PoE power removed from ports using this command can be used by other ports on the same module.
Example
The following command shuts down inline power currently provided to ports 4 and 5 on slot 3:
disable inline-power ports 3:4-5
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the G48P module installed in the BlackDiamond 8800 family of
switches.
426
Disables inline power to all ports on the switch.
Disables inline power to the specified ports.
disable inline-power
disable port
command does not affect the data traffic
command does not affect the inline
ExtremeWare XOS 11.3 Command Reference