Scp2 - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

scp2

scp2 {cipher [3des | blowfish]} {port <portnum>} {debug <debug_level>}
<user>@ [<hostname> | <ipaddress>]:<remote_file> <local_file> {vr
<vr_name>}
or
scp2 {cipher [3des | blowfish]} {port <portnum>} {debug <debug_level>}
<local_file> <user>@ [<hostname> | <ipaddress>]:<remote_file> {vr
<vr_name>}
Description
The first command initiates an SCP2 client session to a remote SCP2 server and copies a configuration
or policy file from the remote system to the switch.
The second command initiates an SCP2 client session to a remote SCP2 server and copies a
configuration or policy file from the switch to a remote system.
Syntax Description
3des
blowfish
portnum
debug_level
user
hostname
ipaddress
remote_file
local_file
vr_name
Default
The default settings for SSH2 parameters are as follows:
cipher—3des encryption
●
port—22
●
compression—off
●
debug_level—0 (zero)
●
vr_name—VR-Mgmt
●
800
Specifies that the 3des cipher should be used for encryption. This is the default.
Specifies that the blowfish cipher should be used for encryption.
Specifies the TCP port number to be used for communicating with the SSH2 client. The
default is port 22.
Specifies a debug level. The default is 0. With a default of 0, the range is 1 through 3.
Specifies a login name for the remote host.
Specifies the name of the remote host.
Specifies the IP address of the remote host.
Specifies the name of the remote file (configuration file, policy file) to be transferred.
Specifies the name of the local file (configuration file, policy file) to be transferred.
Specifies the virtual router. The default virtual router is VR-Mgmt.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450 switch do not
support user-created VRs.
ExtremeWare XOS 11.3 Command Reference