Extreme Networks ExtremeWare XOS Command Reference Manual page 548

Commands for Status Monitoring and Statistics
To get a listing of the components present in the system, use the following command:
show log components
Example
The following command displays the event counters for event conditions of severity debug-summary or
greater in the component STP.InBPDU:
show log counters stp.inbpdu severity debug-summary
The following is sample output from this command:
Comp SubComp
------- ----------- ----------------------- ------------- --------
STP InBPDU
STP InBPDU
STP InBPDU
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when 'Included' was Y(es)
The following command displays the event counters for the event condition PDUDrop in the component
STP.InBPDU:
show log counters "STP.InBPDU.Drop"
The following is sample output from this command:
Comp SubComp
------- ----------- ----------------------- ------------- --------
STP InBPDU
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when 'Included' was Y(es)
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
548
Condition
Drop
Ign
Mismatch
Condition
Drop
Severity Occurred
Error
Debug-Summary
Warning
Severity Occurred
Error
ExtremeWare XOS 11.3 Command Reference
In Notified
-- --------
0 Y 0
0 N 0
0 Y 0
In Notified
-- --------
0 Y 0