Disable Snmp Traps - Extreme Networks ExtremeWare XOS Command Reference Manual

disable snmp traps

disable snmp traps
disable snmp traps
Description
Prevents SNMP traps from being sent from the switch.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
This command does not clear the SNMP trap receivers that have been configured. The command
prevents SNMP traps from being sent from the switch even if trap receivers are configured.
To view if SNMP traps are being sent from the switch, use the command. The
show management show
command displays information about the switch including the enabled/disabled state of
management
SNMP traps being sent.
Example
The following command prevents SNMP traps from being sent from the switch to the trap receivers:
disable snmp traps
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
167
ExtremeWare XOS 11.3 Command Reference