Extreme Networks ExtremeWare XOS Command Reference Manual page 953

configure stpd ports link-type
between several switches operating in 802.1w mode with auto links, the non-STP switch may negotiate
full-duplex even though the broadcast domain extends over several STP devices.
If the switch operates in 802.1D mode, any configured port link type will behave the same as the
broadcast link type.
Example
The following command configures slot 2, ports 1 through 4 to be point-to-point links in STPD s1:
configure stpd s1 ports link-type point-to-point 2:1-2:4
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
953
ExtremeWare XOS 11.3 Command Reference