Configure Edp Advertisement-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual

configure edp advertisement-interval

configure edp advertisment-interval <timer> holddown-interval <timeout>
Description
Sets the advertisement interval and hold down interval for EDP.
Syntax Description
timer
timeout
Default
The default setting for timer is 60 seconds, and for timeout is 180 seconds.
Usage Guidelines
Extreme Discover Protocol (EDP) is used to gather information about neighbor Extreme Networks
switches. EDP-enabled ports advertise information about the Extreme switch to other switches on the
interface and receive advertisements from other Extreme switches. Information about other Extreme
switches is discarded after the hold down interval timeout value is reached without receiving another
advertisement.
Example
The following command configures the EDP advertisement-interval to 2 minutes and the hold down
interval to 6 minutes:
configure edp advertisement-interval 120 holddown-interval 360
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the advertisement interval in seconds.
Specifies the hold down interval in seconds.
configure edp advertisement-interval
285