Configure Lldp Ports Vendor-Specific Dot3 Link-Aggregation - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands
configure lldp ports vendor-specific dot3 link-
aggregation
configure lldp ports [all | <port_list>] [advertise | no-advertise] vendor-
specific dot3 link-aggregation
Description
Configures the LLDP port to advertise or not advertise link-aggregation capabilities to its neighbors.
Syntax Description
all
port_list
advertise
no-advertise
Default
No advertise.
Usage Guidelines
When configured, this TLV is added to each LLDP port LLDPDU indicating the link-aggregation
capabilities, status, and value of the master port of the load-sharing group.
Example
The following command configures port 1:12 to not advertise link-aggregation capabilities to neighbors:
configure lldp ports 1:12 not-advertise vendor-specific dot3 link-aggregation
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
390
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Specifies to send the information to neighbors.
Specifies not to send the information to neighbors.
ExtremeWare XOS 11.3 Command Reference