Commands for Configuring Slots and Ports on a Switch
information displays show real-time statistics, or you can configure the display to show a snapshot of
real-time statistics (as in earlier versions of the software).
Commands that require you to enter one or more port numbers use the parameter
in the
<port_list>
syntax. On a modular switch, a
can be a list of slots and ports. On a stand-alone switch, a
<port_list>
can be one or more port numbers.For a detailed explanation of port specification, see
"Port
<portlist>
Numbering"
in
Chapter
1.
NOTE
The BlackDiamond 8810 switch was formerly known as Aspen.
280
ExtremeWare XOS 11.3 Command Reference