Show Dot1P - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

show dot1p

show dot1p
Description
Displays the 802.1p-to-QoS profile mappings.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the current 802.1p-to-QoS mappings on the switch:
show dot1p
Because the BlackDiamond 8800 family of switches (formerly known as Aspen) and the Summit X450
switch have 2 default QoS profiles and the BlackDiamond 10K switch has 8 default QoS profiles you see
different displays depending on the platform.
BlackDiamond 8800 family of switches and Summit X450 switch only. Following is sample output from the
show dot1p
802.1p Priority Value
0
1
2
3
4
5
6
7
BlackDiamond 10K switch only. If a port is in more than one virtual router, you cannot use the 802.1p
feature. If you attempt to configure 802.1p information on a port that is in more than one virtual router,
the system returns the following message:
Warning: Port belongs to more than one VR. Port properties related to diff serv and
code replacement will not take effect.
720
command on the BlackDiamond 8810 switch:
QOS Profile
QP1
QP1
QP1
QP1
QP1
QP1
QP1
QP8
ExtremeWare XOS 11.3 Command Reference