Configure Vlan Name - Extreme Networks ExtremeWare XOS Command Reference Manual

VLAN Commands

configure vlan name

configure vlan <vlan_name> name <name>
Description
Renames a previously configured VLAN.
Syntax Description
vlan_name
name
Default
N/A.
Usage Guidelines
You cannot change the name of the default VLAN "Default."
NOTE
If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks recommends
that you specify the identifying keyword as well as the actual name. If you do not use the keyword, the system may
return an error message.
Example
The following command renames VLAN vlan1 to engineering:
configure vlan vlan1 name engineering
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
594
Specifies the current (old) VLAN name.
Specifies a new name for the VLAN.
ExtremeWare XOS 11.3 Command Reference