Configure Vlan Qosprofile - Extreme Networks ExtremeWare XOS Command Reference Manual

QoS Commands

configure vlan qosprofile

configure vlan <vlan_name> {qosprofile} <qosprofile>
Description
Configures a VLAN to use a particular QoS profile.
Syntax Description
vlan_name
qosprofile
Default
The default for the BlackDiamond 10K switch is QP1, and the default for the BlackDiamond 8800 family
of switches (formerly known as Aspen) and the Summit X450 switch is none.
Usage Guidelines
Extreme switches support eight QoS profiles (QP1 to QP8) for each port.
NOTE
This command applies only to untagged packets.
Example
The following command configures VLAN accounting to use QoS profile QP3:
configure vlan accounting qosprofile qp3
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
706
Specifies a VLAN name.
Specifies a QoS profile.
NOTE: None is available only on the BlackDiamond 8800 family of switches
and the Summit X450 switch.
ExtremeWare XOS 11.3 Command Reference