Show Dhcp-Client State - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

show dhcp-client state

show dhcp-client state
Description
Displays the current DHCP/BOOTP client state for each vlan.
Syntax Description
This command has no arguments or variables.
Default
Displays the client state for all existing VLANs.
Usage Guidelines
None.
Example
The following command displays the DHCP/BOOTP status for all VLANs:
show dhcp-client state
Depending on your configurations, output from this command is similar to the following:
Client VLAN
--------------- -------- --------------- ---------------------------------------
Default
accounting
Mgmt
A total of 3 vlan(s) where displayed
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
182
Protocol Server
BOOTP 10.1.2.3
DHCP 10.2.3.4
None 0.0.0.0
Current State
Received IP address configured on vlan
DHCP state; Requesting
ExtremeWare XOS 11.3 Command Reference