Enable Radius - Extreme Networks ExtremeWare XOS Command Reference Manual

enable radius

enable radius {mgmt-access | netlogin}
Description
Enables the RADIUS client on the switch.
Syntax Description
mgmt-access
netlogin
Default
RADIUS authentication is disabled for both switch management and network login by default.
Usage Guidelines
Before you enable RADIUS on the switch, you must configure the servers used for authentication and
configure the authentication string (shared secret) used to communicate with the RADIUS
authentication server.
To configure the RADIUS authentication servers, use the following command:
{mgmt-access | netlogin} [primary | secondary] server [<ipaddress> | <hostname>]
{<udp_port>} client-ip [<ipaddress>] {vr <vr_name>}
To configure the shared secret, use the following command:
netlogin} [primary | secondary] shared-secret {encrypted} <string>
If you do not specify a keyword, RADIUS authentication is enabled on the switch for both management
and network login. When enabled, all web, Telnet, and SSH logins are sent to the RADIUS servers for
authentication. When used with a RADIUS server that supports ExtremeWare XOS CLI authorization,
each CLI command is sent to the RADIUS server for authorization before it is executed.
Use the keyword to enable RADIUS authentication for switch management functions.
mgmt-access
Use the keyword to enable RADIUS authentication for network login.
netlogin
Example
The following command enables RADIUS authentication on the switch for both management and
network login:
enable radius
The following command enables RADIUS authentication on the switch for network login:
enable radius netlogin
ExtremeWare XOS 11.3 Command Reference
Specifies the switch management RADIUS authentication server.
Specifies the network login RADIUS authentication server.
configure radius
configure radius {mgmt-access |
enable radius
789