STP Commands
To view the names of the STPDs on the switch, enter
and press [Tab]. Scroll to the end of the
configure
output to view the names.
Each STPD has its own Root Bridge and active path. After the STPD is created, one or more VLANs can
be assigned to it.
Example
The following example creates an STPD named purple_st:
create stpd purple_st
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
962
ExtremeWare XOS 11.3 Command Reference