Refresh Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

refresh policy

refresh policy
refresh policy <policy-name>
Description
Refreshes the specified policy.
Syntax Description
policy-name Specifies the policy to refresh.
Default
N/A.
Usage Guidelines
Use this command when a new policy file for a currently active policy has been downloaded to the
switch, or when the policy file for an active policy has been edited. This command reprocesses the text
file and updates the policy database.
If you attempt to refresh a policy that is not currently active, you will receive an error message.
For an ACL policy, the command is rejected if there is a configuration error or hardware resources are
not available.
Example
The following example refreshes the policy zone5:
refresh policy zone5
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
655
ExtremeWare XOS 11.3 Command Reference