Configure Esrp Add Member - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ESRP Commands

configure esrp add member

configure esrp <esrpDomain> add member <vlan_name>

Adds a member VLAN to an ESRP domain.

Syntax Description

Usage Guidelines

You can configure zero or more member VLANs for each ESRP domain. An ESRP domain contains one

master and zero or more member VLANs.

Master VLANs can have their own set of ports, and member VLANs can have a different set of ports.

The state of the ESRP device determines whether the ports in the master and member VLANs are in the

forwarding or blocking state.

The following command adds the member VLAN green to the ESRP domain esrp1:

configure esrp esrp1 add member vlan green

This command was first available in ExtremeWare XOS 11.0.

Platform Availability

This command is available on all platforms.

Specifies the name of an ESRP domain.

Specifies the name of the member VLAN.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3