Show Sflow Configuration - Extreme Networks ExtremeWare XOS Command Reference Manual

show sflow configuration

show sflow {configuration}
Description
Displays the current sFlow configuration.
Syntax Description
This command has no arguments or variables
Default
N/A.
Usage Guidelines
This command displays the sFlow configuration of your system.
The following fields are displayed:
Global Status—sFlow is globally enabled or disabled
●
Polling interval—How often the hardware is polled for statistics, in seconds
●
Sampling rate—Packets are sampled, on average, once for every rate-number of packets
●
Maximum cpu sample limit—Maximum number of packets per second sampled before sample
●
throttling takes effect
Agent IP—IP address inserted into the sFlow data packets to identify the sFlow switch
●
Collectors—To which IP address and port, and from which virtual router, the sFlow packets are sent
●
Port Status—Enabled or disabled for statistics gathering
●
Port Sample-rate—Shows the sampling rate configured for the port and the actual rate if CPU
●
throttling has taken effect
Port Subsampling factor—See the command
●
Example
To display the sFlow configuration on your system, use the following command:
show sflow
The output from this command is similar to the following:
SFLOW Global Configuration
Global Status: enabled
Polling interval: 20
Sampling rate: 8192
Maximum cpu sample limit: 2000
SFLOW Configured Agent IP: 10.203.2.38 Operational Agent IP: 10.203.2.38
Collectors
ExtremeWare XOS 11.3 Command Reference
configure sflow ports sample-rate
show sflow configuration
for details
563