Enable Dot1P Examination Inner-Tag Port - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

enable dot1p examination inner-tag port

enable dot1p examination inner-tag port [all | <port_list>]

Used with VMANs, and instructs the switch to examine the 802.1p value of the inner tag, or header of

the original packet, to determine the correct egress queue on the egress port.

Syntax Description

Usage Guidelines

Use this command to instruct the system to refer to the 802.1p value contained in the inner, or original,

tag when assigning the packet to an egress queue at the egress port of the VMAN.

for information on configuring and displaying the current 802.1p and DiffServ configuration for the

inner, or original header, 802.1p value.

The following command puts the packets in the egress queue of the VMAN egress port according to the

802.1p value on the inner tag:

enable dot1p examination inner-tag port 3:2

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available only on the BlackDiamond 8800 family of switches (formerly known as

Aspen) family of switches and the Summit X450 switch.

ExtremeWare XOS 11.3 Command Reference

Specifies all ports.

Specifies a list of ports or slots and ports.

enable dot1p examination inner-tag port

Extremeware xos 11.3