Configure Snmp Sysname - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmp sysName

configure snmp sysname <sysName>
Description
Configures the name of the switch.
Syntax Description
sysName
Default
The default
sysname
Usage Guidelines
You can use this command to change the name of the switch. A maximum of 32 characters is allowed.
The
sysname
To view the name of the system listed on the switch, use the
command displays switch statistics including the name of the system.
Example
The following command names the switch:
configure snmp sysname engineeringlab
The following output from the
switch:
SysName:
SysLocation:
SysContact:
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
120
An alphanumeric string that specifies a device name.
is the model name of the device (for example,
appears in the switch prompt.
show switch
engineeringlab
englab
FredJ
BlackDiamond10808
show switch
command displays engineeringlab as the name of the
ExtremeWare XOS 11.3 Command Reference
).
command. The
show switch