Extreme Networks ExtremeWare XOS Command Reference Manual page 730

QoS Commands
Usage Guidelines
BlackDiamond 10K switch only. The number of ingress queues per port varies between the 1G I/O
module and the 10G module. On the 1G module, you have two ingress queues per port. The priority
values of 1 to 4 map to the first queue, and the priority values of 5 to 8 map to the second queue. On
the 10G module, you have eight ingress queues per port. The priority values of 1 to 8 map one to each
of the eight queues.
Example
The following command resets the QoS profiles for all ports to default settings:
unconfigure qosprofile
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
The parameters ingress, egress, and ports are available only on the BlackDiamond 10K switch.
730
ExtremeWare XOS 11.3 Command Reference