show lacp lag
show lacp lag <group-id> {detail}
Description
Displays LACP, or dynamic link aggregation, settings for the specified LAG.
Syntax Description
group-id
detail
Default
N/A.
Usage Guidelines
This command displays the following information about the specified LACP LAG:
LAG
●
Identifies the particular LAG. This number comes from logical port assigned to the LAG and is
■
the LAG group ID.
Actor Sys-Pri
●
Shows the system priority for that LAG.
■
If this number is lower than the number displayed for the Partner Sys-Pri, the system you are
■
working on is the controlling partner in the LAG.
Actor Key
●
Automatically generated LACP key.
■
Partner MAC
●
Identifies the MAC address for the system connecting to the LAG on the remote end.
■
Partner Sys-Pri
●
Shows the system priority for that LAG on the remote end.
■
If this number is lower than the number displayed for the Actor Sys-Pri, the system at the remote
■
end is the controlling partner in the LAG.
Partner Key
●
LACP key automatically generated by the system to which this aggregator is connected.
■
If this number is lower than the number displayed for the Actor Key, the partner system is the
■
controlling partner in the LAG.
Agg Count
●
Identifies the number of ports added to the aggregator for that LAG.
■
Member port
●
ExtremeWare XOS 11.3 Command Reference
Specifies the LAG group ID you want to display. This is the number of the port
you configured as the logical port of the LAG.
Show detailed information.
show lacp lag
343