Configure Radius-Accounting Server - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

configure radius-accounting server

configure radius-accounting {mgmt-access | netlogin} [primary | secondary]
server [<ipaddress> | <hostname>] {<tcp_port>} client-ip [<ipaddress>] {vr
<vr_name>}
Description
Configures the RADIUS accounting server.
Syntax Description
mgmt-access
netlogin
primary
secondary
ipaddress
hostname
tcp_port
ipaddress
vr_name
Default
The following lists the default behavior of this command:
The UDP port setting is 1813
●
The virtual router used is VR-Mgmt, the management virtual router
●
Switch management and network login use the same RADIUS accounting server.
●
Usage Guidelines
NOTE
The BlackDiamond 8800 family of switches and the Summit X450 switch do not support user-created VRs.
Use this command to specify the radius accounting server.
The accounting server and the RADIUS authentication server can be the same.
Use of the
<hostname>
Beginning with ExtremeWare XOS 11.2, you can specify one pair of RADIUS accounting servers for
switch management and another pair for network login. To specify RADIUS accounting servers for
748
Specifies the RADIUS accounting server for switch management.
Specifies the RADIUS accounting server for network login.
Configure the primary RADIUS accounting server.
Configure the secondary RADIUS accounting server.
The IP address of the accounting server being configured.
The host name of the accounting server being configured.
The UDP port to use to contact the RADIUS accounting server.
The IP address used by the switch to identify itself when communicating with
the RADIUS accounting server.
Specifies the virtual router on which the client IP is located.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450
switch do not support user-created VRs.
parameter requires that DNS be enabled.
ExtremeWare XOS 11.3 Command Reference