Commands for Managing the Switch
Example
The following command specifies a target address of 10.203.0.22 with the name A1, and associates it
with the security parameters and target address parameter P1:
configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22
The following command specifies a target address of 10.203.0.22 with the name A1, and associates it
with the security parameters and target address parameter P1, and the notification tags type1 and type2:
configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22 from 10.203.0.23
tag-list type1,type2
History
This command was first available in ExtremeWare XOS 10.1.
The
,
,
and
hex_addr_name
hex_param_name
from <src_ip_address>,
tag-list <tag_list>
parameters were added in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
134
ExtremeWare XOS 11.3 Command Reference