Configure Qosprofile Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

configure qosprofile ports

configure qosprofile {egress} <qosprofile> [{committed_rate <committed_bps>
[k | m]} {maxbw <maxbw_number>} {minbw <minbw_number>} {peak_rate
<peak_bps> [k | m} {priority [<priority> | <priority_number]}]
ports [<port_list> | all]
Description
Modifies the default egress QoS profile parameters.
Syntax Description
qosprofile
committed_rate
maxbw
minbw
peak_rate
priority
priority_number
port_list
all
Default
Minimum bandwidth—0%
●
Maximum bandwidth—100%
●
Priority—By default, each qosprofile is assigned a different priority level:
●
QP1 - 1, Low (the lowest priority)
■
ExtremeWare XOS 11.3 Command Reference
Specifies a QoS profile name. Range is QP1 to QP8.
Specifies an absolute number in K bits or M bits for a guaranteed committed
rate and for a minimum rate for this egress queue.
Specifies maximum allowed input bandwidth as a percentage of port speed.
The range is 0 to 100%, and the default value is 100. Percentages are based
on actual or configured port speed.
Specifies a guaranteed minimum bandwidth for this egress QoS queue as a
percentage of port speed. The range is 0 to 100%, and the default value is 0.
Cumulative percentages of the queue on a given port should not exceed 100%.
Percentages are based on actual or configured port speed.
Specifies an absolute number in K bits or M bits for a maximum rate for this
egress queue.
Specifies a service priority setting for the specified egress queue; this priority
sets the priorities among the available egress queues for the specified port.
Specifies a service priority setting among the available egress ports for the
specified port. Settings are:
• 1, or Low
• 2, or LowHi
• 3, or Normal
• 4 or NormalHi
• 5, or Medium
• 6, or MediumHi
• 8, or HighHi
This is the setting for the egress mode.
Specifies a list of slots and ports to which the parameters apply. May be in the
form 3-5, 2:5, 2:6-2:8.
Specifies this applies to all ports on the device.
configure qosprofile ports
701