Enable Sflow Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

enable sflow ports

enable sflow ports
enable sflow ports <port_list>
Description
Enables sFlow statistical packet sampling on a particular list of ports.
Syntax Description
port_list Specifies a list of ports.
Default
Disabled.
Usage Guidelines
This command enables sFlow on a particular list of ports. You will also need to enable sFlow globally in
order to gather statistics and send the data to the collector. Once sFlow is enabled globally, and on the
ports of interest, sampling and polling will begin.
Use the following command to enable sFlow globally:
enable sflow
NOTE
On the BlackDiamond 8800 family of switches and the Summit X450 switch, sFlow and mirroring are mutually
exclusive. You can enable either sFlow, or mirroring, but not both.
Example
The following command enables sFlow sampling on the port 3:1:
enable sflow ports 3:1
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
525
ExtremeWare XOS 11.3 Command Reference