Commands for Status Monitoring and Statistics
associated filter, the message is at least as severe as the configured severity level, and the message
output matches the regular expression specified.
See the command
default, targets do not have a match expression.
Specifying
any
previously configured, causing any message to be sent that has satisfied all of the other requirements.
To see the configuration of a target, use the following command:
show log configuration target {console | memory-buffer | nvram | primary-msm | backup-
msm | session | syslog {<ipaddress> | <ipPort> | vr <vr_name>} [local0 ... local7]}
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}
Example
The following command sends log messages to the current session, that pass the current filter and
severity level, and contain the string user5:
configure log target session match user5
History
This command was first available in ExtremeWare XOS 10.1.
The
primary-msm
The
parameter was first available in ExtremeWare XOS 11.1.
ipPort
Platform Availability
This command is available on all platforms.
478
on page 532
show log
instead of
match-expression
and
options were first available in ExtremeWare XOS 11.0.
backup-msm
for a detailed description of simple regular expressions. By
effectively removes a match expression that had been
ExtremeWare XOS 11.3 Command Reference