Configure Snmp Syscontact - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmp sysContact

configure snmp syscontact <sysContact>
Description
Configures the name of the system contact.
Syntax Description
sysContact
Default
N/A.
Usage Guidelines
The system contact is a text field that enables you to enter the name of the person(s) responsible for
managing the switch. A maximum of 255 characters is allowed.
To view the name of the system contact listed on the switch, use the
command displays switch statistics including the name of the system contact.
switch
Example
The following command defines FredJ as the system contact:
configure snmp syscontact fredj
The following output from the
SysName:
SysLocation:
SysContact:
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
118
An alphanumeric string that specifies a system contact name.
command displays FredJ as the system contact:
show switch
engineeringlab
englab
FredJ
command. The
show switch
ExtremeWare XOS 11.3 Command Reference
show