Configure Protocol Delete - Extreme Networks ExtremeWare XOS Command Reference Manual

VLAN Commands

configure protocol delete

configure protocol <name> delete [etype | llc | snap] <hex> {[etype | llc |
snap] <hex>} ...
Description
Deletes the specified protocol type from a protocol filter.
Syntax Description
name
hex
Default
N/A.
Usage Guidelines
Supported protocol types include:
etype – IEEE Ethertype.
●
llc – LLC Service Advertising Protocol.
●
snap – Ethertype inside an IEEE SNAP packet encapsulation.
●
Example
The following command deletes protocol type LLC SAP with a value of FEFF from protocol fred:
configure protocol fred delete llc feff
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
588
Specifies a protocol filter name.
Specifies a four-digit hexadecimal number between 0 and FFFF that
represents:
• The Ethernet protocol type taken from a list maintained by the IEEE.
• The DSAP/SSAP combination created by concatenating a two-digit LLC
Destination SAP (DSAP) and a two-digit LLC Source SAP (SSAP).
• The SNAP-encoded Ethernet protocol type.
ExtremeWare XOS 11.3 Command Reference