FDB Commands
Flags
Port List
Example
The following command displays information about all the entries in the FDB:
show fdb
It produces output similar to the following:
Mac
------------------------------------------------------------------------------------
00:a0:23:12:34:56
Flags : d - Dynamic, s - Static, p - Permanent, n - NetLongi, m - MAC, i - IP,
x - IPX, l - lockdown MAC, M - Mirror, B - Egress Blackhole,
b - Ingress Blackhole, v - MAC-based VLAN
Total: 1 Static: 1 Perm: 1 Dyn: 0 Dropped: 0
FDB Aging time: 300
History
This command was first available in ExtremeWare XOS 10.1.
The
and
stats
Platform Availability
This command is available on all platforms.
648
Flags that define the type of entry:
• B - Egress Blackhole
• b - Ingress Blackhole
• d - Dynamic
• s - Static
• p - Permanent
• m - MAC
• n - NetLogin (only on the Summit X450 switch and the BlackDiamond
8800 family of switches)
• l - lockdown MAC
• M - Mirror
• i - an entry also exists in the IP FDB
• x - an entry also exists in the IPX FDBs
• v - NetLogin MAC-Based VLAN (only on the Summit X450 switch and the
BlackDiamond 8800 family of switches)
The ports on which the MAC address has been learned
Vlan
peggy(4094)
parameters were first available in ExtremeWare XOS 11.3.
netlogin
Age
Use
Flags
0000
0000
spm
ExtremeWare XOS 11.3 Command Reference
Port List
5:11